16' Series Draw bar toolbox

[CrazyMOBB]

Posted before but thought I would share again. Standard drawbar, opens from the front so I always have full access. Custom made by local company. Box is 1200Lx 450D x 500H and each gas bottle holders are 340 so total length is 1880. Fits weber and much much more.

 

[Red1]

This is our new box, similar to some others on here. Has slide puts for the webber and Honda as well a a box in the centre to put the outside floor mat etc in. I just have to fit a light in it and it is done.

 

[Mustang]

That looks great!! A few dollars involved there, I would imagine?

 

[Red1]

Mmmmm. More than I like to think about.. But we are really happy with how it came out

 

[Rambo72]

This is our new box, similar to some others on here. Has slide puts for the webber and Honda as well a a box in the centre to put the outside floor mat etc in. I just have to fit a light in it and it is done.

Hi, really like your toolbox design, would you mind giving me the dimensions of it please?
Cheers.

 

[Red1]

Hi, really like your toolbox design, would you mind giving me the dimensions of it please?
Cheers.

Hi Rambo, I have included you in a conversation I had running with someone else after the measurements. There is a copy of them there

 

[michael d]

Hey guys just wondering about toolboxes and total weight. I looked at 3 vans yesterday 1 being a 16.49.1

From memory the tare weight was 1453 and gvm (i think) 1753 meaning can only add 300kg to van with toolbox water in tank clothes food table chairs annex etc etc wouldn't it be really easy to go over the gvm? Sorry its a little off topic. We are looking to buy a 16.49.1 and would want a toolbox for sure but not sure its worth it if u cant load it up.

 

[achjimmy]

Hey guys just wondering about toolboxes and total weight. I looked at 3 vans yesterday 1 being a 16.49.1

From memory the tare weight was 1453 and gvm (i think) 1753 meaning can only add 300kg to van with toolbox water in tank clothes food table chairs annex etc etc wouldn't it be really easy to go over the gvm? Sorry its a little off topic. We are looking to buy a 16.49.1 and would want a toolbox for sure but not sure its worth it if u cant load it up.

Garanteed to go over @michael d i had a box simalar in functionality to @Red1 on our 16:49-3 it weighed close to 70kg empty. So by the time it's loaded it's 100kg plus and right on the drawbar so probably adds 75kg on the tow ball. You pretty much can't have that on a single axle and be legal even duals only get 475kg and would struggle. We got 600kg payload on the Starcraft and with a toolbox weighing only 26kg (here)and everything else loaded for 3-4 people we struggle to be under payload!!!

 

[Sangas]

Hi Rambo, I have included you in a conversation I had running with someone else after the measurements. There is a copy of them there

Hi Red1, looking at toolboxes, and yours looks great, if you can, would appreciate some measurements for cheat sheet. Thanks, Sangas.

 

[Red1]

Hi Sangas, i have included you in a conversation with some photos and the measurements. Hope this helps

 

[AzHaych]

Hi @Red1 could I please trouble you to be included in the conversation with the pics and measurements of that magnificent toolbox

Really appreciate it

Az

 

[Red1]

Hi @Red1 could I please trouble you to be included in the conversation with the pics and measurements of that magnificent toolbox

Really appreciate it

Az

No worries, all done

 

[AzHaych]

No worries, all done

Thank you @Red1 greatly appreciated.

Cheers

Az