18' Series Truma Aircon Fault light

[Romanog4]

Hi there.
New to this forum.
I have a Jayco Expanda with the Truma Aventa aircon unit.
My Unit won't turn on anymore. It has a solid red light on the unit. It flashes 4 times when I try turn it on but does nothing else. Has anyone come across this issue before. It is still getting power. I got it to turn on yesterday and it ran fpr 10 mins then dropped out again.
Any advice would help.
Thank you

 

[Adventure Bound]

Hi there.. I have the same problem. Did you find out the issue ?

 

[Boots in Action]

Hi there.
New to this forum.
I have a Jayco Expanda with the Truma Aventa aircon unit.
My Unit won't turn on anymore. It has a solid red light on the unit. It flashes 4 times when I try turn it on but does nothing else. Has anyone come across this issue before. It is still getting power. I got it to turn on yesterday and it ran fpr 10 mins then dropped out again.
Any advice would help.
Thank you

@Romanog4 , this may help:
If it runs for a while and then cuts out, it could be the thermal overload switch connected to the motor. If motor is running hotter than normal, the thermal overload switch will cut off the power until motor cools down. Potentially a fault in the motor windings (short), or run/start capacitor failure. Or even thermostat problem.

 

[Ifit4u4x4]

Hi there.
New to this forum.
I have a Jayco Expanda with the Truma Aventa aircon unit.
My Unit won't turn on anymore. It has a solid red light on the unit. It flashes 4 times when I try turn it on but does nothing else. Has anyone come across this issue before. It is still getting power. I got it to turn on yesterday and it ran fpr 10 mins then dropped out again.
Any advice would help.
Thank you

Did u resolve this issue ? As I have the same thing

 

[Ifit4u4x4]

Hi there.. I have the same problem. Did you find out the issue ?

Hey did u find out what was wrong with your ac

 

[Ifit4u4x4]

Did anyone have this problem resolved ?

 

[ace84]

HI I found this on another page. I gave it a go and fixed it mine had a faulty temp sensor 



Hopes this helps