Today's the day!
- Thread starter Bmhdg76
- Start date
Okay after being in the van for a short time, the only issues I have found so far is that one of the water tanks seems to be dropping a reasonable amount of water onto the ground. Not sure if just coming from the breather, but we are very level ground so don't really think this should be the issue. Will just have to keep an eye on this.
And as previously mentioned the USB socket on the drifter is not accessible due to it being located too close to the wall. Will probably move it across and put the Steca where the drifter was to cover any holes.
BJ
And as previously mentioned the USB socket on the drifter is not accessible due to it being located too close to the wall. Will probably move it across and put the Steca where the drifter was to cover any holes.
BJ
Okaÿ so here's a few more pics..
You can see what I mean about the Drifter being too close to the wall to use the USB socket.
We have been one of the lucky ones in that the mattress is really comfortable so at this stage won't be changing it.
The landing pad is big enough for the van, just have it pushed right back and over to get the awning mostly open around the shed beside the house. Will move it when we have stopped being inside it so much!
We need to find some sort of decal or something to place on the rear of the van, it is quite plain. Might have to contact for a forum sticker at the least!
BJ
You can see what I mean about the Drifter being too close to the wall to use the USB socket.
We have been one of the lucky ones in that the mattress is really comfortable so at this stage won't be changing it.
The landing pad is big enough for the van, just have it pushed right back and over to get the awning mostly open around the shed beside the house. Will move it when we have stopped being inside it so much!
We need to find some sort of decal or something to place on the rear of the van, it is quite plain. Might have to contact for a forum sticker at the least!
BJ
I will probably move it sideways and put the Steca controller there. Need to figure out how the vents come off behind the fridge to get into that space.
BJ
Thats what I'd be doing. But I would mention it to the dealer at service time and maybe do a deal..... "Leave it in its stupid position, but give me a free serive as compensation. "
@maccayak, yes it would be a warranty job, but would still need something to cover the holes, so am just thinking that I will move it when I install my charger and inverter remote displays and the solar reg.
@Soaring, free service I would love that but don't like my chances. I mean to be honest for what they check it should be free. Even the car dealer did it on my wife's Mazda for free at 1000klms with oil and filter change and that cost us $10k less!
BJ.
@Soaring, free service I would love that but don't like my chances. I mean to be honest for what they check it should be free. Even the car dealer did it on my wife's Mazda for free at 1000klms with oil and filter change and that cost us $10k less!
BJ.
