18' Series BIKE RACK

[craigandteena]

Hi all, I am new to the forum and thought I would add the look of the Fiamma bike rack I installed on my solid back wall 14 expanda. I installed it high for two reasons, one to be able to add an additional brace inside that is attached to the steel frame of the lower pop top frame and two to keep clear of the external hot water system on the rear bumper. I took this over some rough roads with two adult mountain bikes with no issues.

 

[Izzya123]

Has anyone got either a Thule or Fiamma A-frame bike rack??? If so, is it tried & tested?? I have the extended draw bar. Would you recommend? Thnx. Izzy

 

[skippy]

Has anyone got either a Thule or Fiamma A-frame bike rack??? If so, is it tried & tested?? I have the extended draw bar. Would you recommend? Thnx. Izzy

Hello Izzy
I think it will work fine as long as you don't go over your max ball weight and just be mindful when your reverseing that you don't hit the bike wheels on the back of the towing vehicle when jack knifing.

 

[BigSkiddy]

@Izzya123 I looked at putting an A frame rack on but I have a spare wheel in there so it wasn't going to work. Where's your spare?

 

[Izzya123]

@Izzya123 I looked at putting an A frame rack on but I have a spare wheel in there so it wasn't going to work. Where's your spare?

Tyres beneath the A frame. Have the extended draw bar. Hopefully someone has one & can give us some feed back re tyre etc.

 

[BigSkiddy]

Post a photo of your drawbar. I might be able to come up with a solution.