yes indeedWe still have a vent, but its in the actual back of the step area and not in the door itself. The door vent is much easier to block off from dust sandwich a piece of foam ... not sure how I'm going to deal with ours.
AzHaych's new 18.58.1OB Club Lounge
- Thread starter AzHaych
- Start date
yes indeedWe still have a vent, but its in the actual back of the step area and not in the door itself. The door vent is much easier to block off from dust sandwich a piece of foam ... not sure how I'm going to deal with ours.
Ours is the same
We still have a vent, but its in the actual back of the step area and not in the door itself. The door vent is much easier to block off from dust sandwich a piece of foam ... not sure how I'm going to deal with ours.
Yes mate, getting very close now. I have my "Burnsie Checklist" all printed off and ready to go, just going to give the Disco a quick tub in the morning for the photos and then head over to Page Bros.
I'm going to put it over the weighbridge on the way home to check the numbers before I load all the gear into it over the weekend.
Thanks for the checklist bud
Last edited:
Sorry about the delay guys. Handover went really well only a couple of minor things that I listed in the earlier post. The few items that will be done at the first service are
-Second picnic table to be installed in lieu of it being installed where I didnt want it.
-Replace rear bar with "Black" bar as stated on my sign off form (Plain Gal is on it now)
-Edge trim around Club Lounge table is overlapped on the join
-Dinette table is too tight as the bed converta (fits but its tight)
-Drifter panel and hot water switch to be moved next to the TV
-Gas bottle cover to be fitted to drawbar
Overall we are really happy with the finish, I couldn't really pick anything wrong with the finish. Thanks to @burnsie's checklist we went over every cupboard, drawer, fitting and appliance and all was good.
All the cupboards have been fitted out with shelves and now saved me some money on not having to fit them out and we got a filtered fresh water tap that we never optioned or payed for.
So here are some pics @Aussiejet
-Second picnic table to be installed in lieu of it being installed where I didnt want it.
-Replace rear bar with "Black" bar as stated on my sign off form (Plain Gal is on it now)
-Edge trim around Club Lounge table is overlapped on the join
-Dinette table is too tight as the bed converta (fits but its tight)
-Drifter panel and hot water switch to be moved next to the TV
-Gas bottle cover to be fitted to drawbar
Overall we are really happy with the finish, I couldn't really pick anything wrong with the finish. Thanks to @burnsie's checklist we went over every cupboard, drawer, fitting and appliance and all was good.
All the cupboards have been fitted out with shelves and now saved me some money on not having to fit them out and we got a filtered fresh water tap that we never optioned or payed for.
So here are some pics @Aussiejet
Last edited:
Thanks mate, Melbourne Grandfinal weekend we are getting away to Mulwala on the Murray for an extended long weekend. Leaves me this weekend and next to pack it out and fit the new waterproof bed ends.
Nice mate, bit of a relief to ill bet. Nice touch with the fishing show on tv.
Awesome Az... Looks great.
Hey would you mind flicking me the Check List you were referring to ? Would it be easier to flick to my email ?
Love the tug by the way. I have a D3, and a Defender 110 for my work car. Well, that's what told Mrs Accountant I needed for a work car anyway. Haha
Hey would you mind flicking me the Check List you were referring to ? Would it be easier to flick to my email ?
Love the tug by the way. I have a D3, and a Defender 110 for my work car. Well, that's what told Mrs Accountant I needed for a work car anyway. Haha
Thanks mate, it is great to finally get it home.
Had to break her in with a beer first!
Love the Disco Steve, I thought my old STX550 was best tow vehicle on the planet until I got the Disco!
Thanks Dave, absolutely stoked with the club lounge, we sat in it for awhile tonight and it was really comfortable. The table is definitely smaller than a dinette table but plenty big enough for us. It actually just pops off the pole and then removing the pole it becomes a bed convertor or remove entirely for more room. I'll take some pics on the weekend, it works really well.
Yup
Thats a logical and practical design!!, Is there an extra cushion floating around fro the convertor. The table look similar in size to ours, and to be honest we thought it a "touch" on the smaller side. Although we could squeeze too many people on the couch for the table size, in practical terms and on a normal "non squeeze" day its fine
Does the table fit correctly.. our 2nd Jayco now where the dinette table does not fit into the guides that are there for it as its too big so has to be sitting on a angle
Could I please get a copy of your checklist too? this will be our first van and first adventure I to camping, we feel we are going on a bit blinded, just the little things we are aware of, like needing hoses?!?!