Jayco Supplied Weighbridge Tickets

[burnsie]

So was looking through the threads and found one relating to Jayco supplying a weighbridge ticket thanks @17triton and got me thinking

Did you get a weighbridge ticket in your pack with the paperwork and dvd?

So had a look and actually found mine in the DVD case tonight (10 months later ......hadn't opened it previously, interestingly it matched the plate.....


Sorry about the plate pic...

You would hope with a "printed" piece of paper and a matching compliance plate it would be ok, but with so many inconsistencies with forum members it would appear not......

Created a poll to see what peoples actual real life results are..........let me know if any other "Possible Responses" should be added, and be nice...

 

[Pace]

http://www.expandasdownunder.com/threads/new-to-forum.3637/page-2#post-51835

post #24 within above link is mine from a couple years back. Pace.

 

[Fabulous]

I haven't opened the DVD - might have to have a look.

We have weighed ours full and it's around 100kg below maximum according to plate - so not too fussed.

 

[MDS69]

My compliance plate


My weighbridge docket details
Axle Weight 1470kg
Tow Ball Weight 161kg
Total Weight 1631kg

My rego papers details
Tare 1609kg
GVM 1723kg

Which figures do I use to determine payload. Thanks. (this always confuses me sorry)

 

[JT76]

@MDS69 payload is your atm less your tare so in you case it would be 311kg.

 

[burnsie]

@MDS69 payload is your atm less your tare so in you case it would be 311kg.

Which appears to be about right for a single axle which is usually 300kg I believe.

 

[MDS69]

@MDS69 payload is your atm less your tare so in you case it would be 311kg.

Cool. That means I have more payload than I thought I had.

 

[dagree]

You got me thinking @burnsie.... I know I had seen a weight docket somewhere so went looking through my folders for the van.... Nothing

Sat down again and remembered... It's in the van inside the door of the circuit breaker.
Went out and had a look and it's spot on with the plate but haven't had the van weighed though!

 

[Rockape]

My compliance plate was 4kgs lower than the Weighbridge reading, so not to bad . ATM was was around 30 kgs out, and Jayco supplied a new compliance plate.