Hi everyone, I finished off my anderson plug connection to my van yesterday, I used to run my waeco in the van from the car through 7 pin plug but it didn't like it and needed to have battery switch on in the van. I did some tests and results are as follows. Power to the cigarette lighter socket in van with car running through 7 pin plug is 10.8 volts so probably why waeco doesn't like it. I now have 14v comming from anderson plug with car running which now charges battery. Also in this circuit another lighter socket for waeco.The Jayco setec unit only supplies 9.7v to battery through the 7 pin plug which is not much good.
I did intend to install a cetek 250 which i have read about in various posts but now i'm not sure as i am getting 14v to battery, however i do need some sort of solar regulator which at this stage I'll probably use portable pannels. Any advice on what to do? Cheers Burnsy
I did intend to install a cetek 250 which i have read about in various posts but now i'm not sure as i am getting 14v to battery, however i do need some sort of solar regulator which at this stage I'll probably use portable pannels. Any advice on what to do? Cheers Burnsy