Hi,
I have just had a tow bar installed on a Jeep Grand Cherokee for a 2012 Jayco Expanda 14.44 (12 Pin Plug)
When plugging in the Van the tails lamp/side lamps on the van come on when the ignition is turned on. I have confirmed Pin 7 goes live when the ignition is turned on. My understanding is Pin 7 would normally be connected to the Parker lights not the ignition being turned on.
When turning the parkers on the Jeep on it does not turn the caravan tail lights on. (when the ignition is off)
Is this wiring correct or should Pin 7 be connected to the parker light control on the Tug.
Thanks Brad.
I have just had a tow bar installed on a Jeep Grand Cherokee for a 2012 Jayco Expanda 14.44 (12 Pin Plug)
When plugging in the Van the tails lamp/side lamps on the van come on when the ignition is turned on. I have confirmed Pin 7 goes live when the ignition is turned on. My understanding is Pin 7 would normally be connected to the Parker lights not the ignition being turned on.
When turning the parkers on the Jeep on it does not turn the caravan tail lights on. (when the ignition is off)
Is this wiring correct or should Pin 7 be connected to the parker light control on the Tug.
Thanks Brad.