I am biased as I work at Redarc in Lonsdale and I build the Towpro but for me, it's the only brake controller I would install
So I used the Towpro for the first time this weekend, and after about 2km running in Auto mode, I noticed the light start blinking Orange once and purple 4 times, and it was back in a manual mode.
Looked up the manual and it said it was some sort of "limp" mode.
Pulled over and checked/disconnected the 12 pin plug (brakes were still working but no inertia operation), but it stayed this way for 200km.
After we set up at the park, I tried reconnecting the plug to the car again after it had been off for a while, and it want back to normal mode.
Any ideas what might have caused it to go 'limp' as it were ?
Towing back from Kiama to Sydney it stayed in auto and worked perfectly all the way home.