The Krisko Kamper - 2011 Expanda 17.56-1 OB
- Thread starter Brougham
- Start date
Hah, you're not gonna believe this but that's exactly what I was looking in there for!! Wasn't any there, but been keeping an eye out for a 12v fan or two for the van when running off batteries without the air con.
If I find any I'll let you know.
Standalone fans, or the jayco integrated light &a fan combo that plugs into the bed end light sockets?
Standalone fans, or the jayco integrated light &a fan combo that plugs into the bed end light sockets?
Standalone.
Gave away the Jayco combos when we sold the expanda. Have to say, they were quite good if a bit bulky.
Gave away the Jayco combos when we sold the expanda. Have to say, they were quite good if a bit bulky.
Why is it always the white ones that are on special
https://www.whitworths.com.au/main_itemdetail.asp?item=35794&search123=fan&intAbsolutePage=1
https://www.whitworths.com.au/main_itemdetail.asp?item=35794&search123=fan&intAbsolutePage=1
Hah wasn't so bad as was a Sunday arvo and he had places to be!How's the ears @Brougham ??
Not my day today. Got finished up rear bar ready to check before sending off to get painted.
Someone (....!) stuffed up the measurements and thus is now 2-300mm too short. I measured from edge of chassis rail and forgot to allow for the actual part that goes in and bolts. Poor mistake for a draftsman to make!
So I either modify it somehow (extend legs with a stiffener) or maybe see if anyone in WA wants a bar like this? Will suit a spare wheel or bike carrier for sure. I wanted it out more to hold a low profile toolbox for my annexe and other bits and bobs.
Someone (....!) stuffed up the measurements and thus is now 2-300mm too short. I measured from edge of chassis rail and forgot to allow for the actual part that goes in and bolts. Poor mistake for a draftsman to make!
So I either modify it somehow (extend legs with a stiffener) or maybe see if anyone in WA wants a bar like this? Will suit a spare wheel or bike carrier for sure. I wanted it out more to hold a low profile toolbox for my annexe and other bits and bobs.
Attachments
just thinking, you would need a piece slightly small to go inside as a sleeve, then fully welded around the outside
grind flush
and it should be ok
grind flush
and it should be ok
I did. I just measured wrong twice.
Yeah exactly my thoughts. Plus maybe a bolt through it at the other end to help it not move.
Get the van out for a shake down trip this weekend to busselton. Turn on the aircon, never used it on cooling yet. Brief cool air then warm. Hmmmm
Bit of mucking around and find the condenser air off fan jammed with dust and crap. 15mins later, all sweet.
Bit of mucking around and find the condenser air off fan jammed with dust and crap. 15mins later, all sweet.
my rear bumper only had 1 bolt holding it in position (each side)
so I put in a second one when I put my spare wheel on the back
Got to admit, very happy so far with the AWA annexe. Very easy to put up and looks the goods
Very interesting thing I noticed but didn't comment to Terry about - we have the gas fridge bent on this side, and everyone has been posting saying with the recent gas law changes that we'd need a large vent in the skirt.
Nope. Didn't ask about it as I like the skirt the way it is.
Nope. Didn't ask about it as I like the skirt the way it is.