The Dogger's new 20.64-1

Dogger

Member
Jun 3, 2016
48
87
18
41
Wallerawang
Other mod I did was fitted an Anderson plug instead of 12pin as the wire came out and near burnt the pin out on trailer side. That involved making a bracket to fit the reverse camera outlet and Anderson.
AD1EB25C-D8D3-41D1-AC35-70802B98D0BB.jpeg

A Pic of the dc charger.
07036F50-56DC-4A2E-AB67-5E7EDE82D681.jpeg
 
  • Like
Reactions: G Daddy and bigcol

Dogger

Member
Jun 3, 2016
48
87
18
41
Wallerawang
I have been busy carrying out some mods the last few weeks. The first was to fit 4 siricco fans 1 on each bed end and 1 on each bunk
7E2887D0-BBE8-412A-89D5-0158907DA254.jpeg

31FDA214-6430-4AAF-B081-609DBF428642.jpeg
 

Dogger

Member
Jun 3, 2016
48
87
18
41
Wallerawang
I gave the van a quick service cleaned and regressed the wheel bearings. The grease was a bit ordinary but bearings were A1. I reckon I have done a bit over 10000km.
0DEC21D3-41A0-488F-B364-38FB2170FE02.jpeg
 
  • Like
Reactions: bigcol

Dogger

Member
Jun 3, 2016
48
87
18
41
Wallerawang
Then give the trusty Toyota a service, I decided to give the erg a clean out and try an Ebay blanking plate a try. I got the one with a hole in it to stop the computer throwing faults... so far so good. It has made a bit of a difference to the way the turbos spool up. The egr wasn’t as bad as I thought for 111000km.
76E144FA-2FCA-472B-89C3-25D5F4575DDD.jpeg
 
  • Like
Reactions: Eddii